discover greebid
Would you like to react to this message? Create an account in a few clicks or log in to continue.

VAG-COM Tacho 2.5 USB to OBD-II Interface Cable

Go down

VAG-COM Tacho 2.5 USB to OBD-II Interface Cable Empty VAG-COM Tacho 2.5 USB to OBD-II Interface Cable

Post  Green Fri Nov 20, 2009 12:49 am

VAG-COM Tacho 2.5 USB to OBD-II Interface Cable



VAG-COM Tacho 2.5 USB to OBD2 interface cable for VW, Audi, Seat and Skoda (certain models - see specifications below). This VAG-COM cable with software is an aftermarket tool for transmission protocols with 16pin OBD2 style data link connector that supports VDO SEED-KEY protected dashboards.

This car diagnostics USB to 16PIN OBD2 cable allows you to read/write EEPROM programming, read PIN codes for new key change and update the millage of your car. Use your computer and this USB enabled VAG-COM interface cable, and you will be able to instantly modify certain settings and clear errors in your vehicle. With easy installation of the software provided with this Tacho 2.5 USB OBD2 cable, you can start self-troubleshooting your very own car, and view results within minutes.

This model supports VDO SEED-KEY protected dashboards so you can read the Immobilizer PIN code of your car without the need to remove the dash panel. The VAG-COM Tacho 2.5 interface cable is easily connectible to your vehicle through the OBD2 diagnostics port. There is no doubt that this simple tool is very cost effective, whether you are a mechanic or just a car owner.



At a Glance...

· VAG-COM Tacho 2.5 USB to OBD2 Interface Cable

· Supports VDO SEED-KEY protected dashboards

· Full featured diagnostic code analyzing software



NOTE:Instructions should be read and advice sought from your technician or mechanic before using this product. The ACVFG-A08 works on vehicles that's are VAG compliant, the best way check if your car is compliant is to check the car user manual, contact your local car dealer or mechanic.



China Manufacturer Specifications

· Primary Function: USB Vag-Com interface cable

· OBDII Plug: J1962 16-Pin Male (to Car)

· USB Port enabled

· Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.

· Some Compatible Vehicle Models and Years++:

- Audi A4, A6, A8 with separate immobilizer box (1994-1999), reads PIN and reads/writes EEPROM

- Audi A3, A4, A6, TT (1998-2002), reads PIN and corrects mileage

- Audi (nearly all VDO dashboards) pre-2001 Reads/writes EEPROM

- VW Beetle (New) Magneti Marelli M73 (1998-2002), reads PIN & corrects mileage

- VW Beetle (New) Magneti Marelli M73 (2001-2005), reads PINs

- VW, Seat, Skoda (nearly all VDO dashboards) pre-2004 reads/writes EEPROM

- VW, Seat (nearly all MotoMeter dashboards) to 2001 reads/writes EEPROM

· Supports VDO SEED-KEY protected dashboards including the following VW's and Skodas:

· - Bora (to 2004)

- Golf 4 (to 2003)

- Jetta (to 2004)

- Passat B6

- Fabia (to 2004)

- Skoda Octavia/Fabia (to 2004)

- Also supports some Seat dashboards up to year 2004

· Dimension: L:154 (CM)

· Manufacturer Ref: D97F00F4FF9D

· Catalog Ref: Taxo 2.5, OBD2 cable, fault code cable, cable for car diagnostics



Other Features

· No power supply needed, just connect to your car and computer

· ++Note: Refer to your car user manual or check with your vehicle manufacturer, dealer or local mechanic to verify that your model is compliant



Package Contents

· Model: ACVFG-A08 USB VAG-COM interface cable

· User CD Manual & Software - English

Green
Admin

Posts : 60
Join date : 2009-09-21
Age : 44

https://findme.forumotion.net

Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum